Click image to view full size image
elliptical head
1.forming methods: pressing, spinning, pressure drums.
2.specification(about size and wall thickness): according toclient''s requirements.
3.our company can provide drawings in accordance withprocessing.
4.head''s gradient as follows:
DN | straight edge | gradient | tolerance of total depth(height) |
| DN≤2000mm | h=25 | outer:1.5inner:1.0 | (-0.2~ 0.6)%DN |
| DN≥2000mm | h=40 | outer:2.5 inner:1.5 | (-0.2~ 0.6)%DN |
others |
| outer:6%h &≤5 inner:4%h &≤3 | (-0.2~ 0.6)%DN |
5.tolerance of groove angle and groovedimension, groove surface roughness asfollows:
items | tolerance |
groove angle | ±2.5° |
groove dimension | ±1mm |
groove surfaceroughness | ≤25, nocracks ,delamination, inclusions and otherdefects |
elliptical head
